Control Board for Mini 4WD with 9-axis IMU sensor
AI Chip v3 is a mini 4WD control board that allows the remote operation of the mini 4WD and Autonomous Running Log.
Start selling on July.
|Mini 4WD is a registered trademark of Tamiya Co., Ltd.
Mini 4WD body is sold separately.
|Add AI Function to your Mini 4WD
You can make a Mini 4WD with the AI function easily by using this board.
The board is equipped with a standard control microcomputer, 9-axis IMU sensor and bluetooth
|The board is equipped with a standard control microcomputer, 9-axis IMU sensor bluetooth
The H-Bridge motor driver is equipped with a module for rapid deceleration control and can be replaced when it malfunctions.
It is possible to run independently using a microcomputer and a sensor.Accurately grasp the course and adjust the driving speed.
Remote control of a mini 4WD using Bluetooth is possible from a personal computer or Android device.
The sensor information from the Mini 4WD can be obtained via Buetooth.The sensor information from the Mini 4WD can be obtained via Buetooth.
You can develop a microcomputer program and add it to your Mini 4WD.
|For embedded equipmen
Board can also be used as a material for embedded equipment
|Sensors||9-axis sensor(MPU9250) made by InvenSense.|
|Battery||LiPo Battery 3.7V 110mAh×1 for On board microchip|
|Display interface||LED×2, Power status LED×1|
|Operation interface||2 Push Switches|
|size||83 mm x 65 mm|
|Supported Mini 4WD Type||MA Chassis|
|Price||28,000 JPY (exclude 8% Japanese Consumption Tax)|
|* Specifications and prices are subject to change without notice due to improvements or other circumstances.|
|Changes from the old product|
|The motor driver is now replaceable.
Change the motor driver to a module,
Even at the time of failure it became possible to replace it by removing it from the socket.
Battery capacity increased by 10% than before.
|Replace sensor with current product
9 axis IMU sensor whose production was completed MPU – 9150 manufactured by TDK Corporation was changed to MPU – 9250.
|Equipped with EEPROM
With EEPROM, sensor calibration data can be saved.
|Bluetooth module changed to option.
The Bluetooth module normally included in the product was selected as option from V3.
| AI Chip V3, Motor Driver Module,
LiPo Battery and Charger
|Replacement Motor driver module, Bluetooth Module
| AI Chip V3 firmware, circuit diagram, processing sample program, sample program for Android, etc.
*Providing Japanese version only
|Manual *Providing Japanese version only (ver.1.0) 2018/07/17（1,673KB）
From usage to introduction of products
|Wiring Manual *Providing Japanese version only (ver.1.0) 2018/0717（463KB）
How to wire AI Chip V3 and motor and motor power supply
|MCUXpresso Environment Manual *Providing Japanese version only (ver.1.0) 2018/0717（586KB）
From download to environment building Windows version, Linux version